[Frameworks] a good microscope for a Bolex?

Caryn Cline carynycline at gmail.com
Sat Sep 22 09:11:39 CDT 2012


Thank you for sharing your knowledge, Scott.  I'm looking for a low cost
solution, but you've given me a lot of ideas.

Best,

CC

On Fri, Sep 21, 2012 at 10:03 AM, Scott Dorsey <kludge at panix.com> wrote:

> Any standard microscope will work with a Bolex.... Edmund Optics will
> sell you a standard device that will replace the eyepiece of the scope
> and attach a C-mount lens to it.  The eyepieces have all been made to a
> DIN standard so just about any microscope since the late 1930s will have
> the same arrangement.  Edmund will also sell you a relay lens arrangement
> which may be needed if you don't have a wide enough focussing range.
>
> It is _easier_ to use a microscope with beamsplitters that allow you to
> look through the microscope at the same time the camera is running.  Many
> newer microscopes can be ordered with "trinocular heads" that have a
> c-mount
> on top which would allow you to connect a Bolex up and run it while looking
> through the eyepieces.
>
> So... the questions begin with how much you want to pay and what kind of
> magnification you need.  You could get a cheap Spencer student microscope
> for a hundred dollars or so and use the Edmund adaptor.  You can spend
> $180,000 for a Zeiss Axio with a built-in beamsplitter.  Both will give
> you good results at lower magnifications with enough light.  The Zeiss
> will have less flare and be a thousand times easier to use especially if
> you're trying to track a moving object.
>
> If you're looking to buy an inexpensive scope in the $1000 region, I would
> look at some of the Russian microscopes that Edmund Scientifics is selling.
> (Edmund Scientifics is not the same company as Edmund Optics... they both
> split off the same parent company but one got the conventional microscopes
> and the other got stereoscopes).
>
> Unless you're looking for lower magnifications (sub-100X) in which case
> ignore
> all this and look at the Mitutoyo machinist's inspection scopes.
> --scott
> _______________________________________________
> FrameWorks mailing list
> FrameWorks at jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>



-- 
Caryn Cline
Filmmaker and Teacher
New York City and Seattle, WA
vimeo.com/carynyc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman-mail5.webfaction.com/pipermail/frameworks/attachments/20120922/7cdb1dc0/attachment.html 


More information about the FrameWorks mailing list