[Frameworks] black mask on colour print film

[Francisco Torres]

Chanhe different Matte box for each shot?

2015-05-18 7:55 GMT-04:00 Bernd Luetzeler <filmi at gmx.de>:

> yes exactly that’s what we did, but the mask wasn’t always 100% centered,
> As a result, when zooming in, it shifted out of the center.
> The person behind the camera didn’t take that too serious in the
> beginning, so in some material the mask goes way out of center.
> After seeing the first rushes we took more care and avoided the same
> mistake in later material.
> But I spoke to the lab, and since we are going to do blow-ups from 16 to
> 35, they said that the horizontal position can be shifted a bit.
> So I guess that is what we will do. I was also thinking about putting a
> mask into that blow-up printer,
> but since we expose from negative, the mask would need to be white (light)
> and not black.
> I guess there aren’t some many other options…
> Bernd
>
>
> > On 18-May-2015, at 17:11, Scott Dorsey <kludge at panix.com> wrote:
> >
> > Matte box on the camera shooting the original material???
> > --scott
> > _______________________________________________
> > FrameWorks mailing list
> > FrameWorks at jonasmekasfilms.com
> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>
> _______________________________________________
> FrameWorks mailing list
> FrameWorks at jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman-mail5.webfaction.com/pipermail/frameworks/attachments/20150518/da13a0f6/attachment.html>