[Frameworks] stabilizing a scan using the sprocket holes? (Davinci Resolve or Avid?)

[ev petrol]

Hey Scotthmm I'll ask - it was at Mono No Aware in Brooklynyou're right, I am short a bit of the top of the frame at the skips, despite the overscantthey're ape splices (can check but most likely with my guillotine splicer)thanks! Moira

moiratierney.net vimeo.com/moiratierney 

    On Tuesday, May 28, 2024 at 08:21:14 PM EDT, Scott Dorsey <kludge at panix.com> wrote:  
 
 What were they scanned on?  If it was a line scanner, you can probably have
them reset the scanner to be more tolerant.... and if it is a line scanner
you may have to do that because you probably won't have a full frame to work
with at the skip.

Tape or cement splices on the original?  I am assuming not cement-butt type.
--scott

-- 
Frameworks mailing list
Frameworks at film-gallery.org
https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://film-gallery.org/pipermail/frameworks_film-gallery.org/attachments/20240529/9d6d4b7e/attachment.htm>