[Frameworks] Lomo UPB-1A pouring issues Lomo UPB-1A pouring issues
Pip Chodorov
frameworks at re-voir.com
Mon Mar 5 13:21:44 CST 2012
Christine,
this is exactly how you are supposed to use it.
One trick I can add is to place the hose downwards instead of facing
up - this way when you remove it you do not risk spilling any in case
the tank is full, it also reduces the chance of leaks because part of
the tube has to necessarily be above the tank level in order to then
come back down where it is secured.
-Pip Chodorov
At 14:14 -0500 5/03/12, Christine Lucy Latimer wrote:
>Kevin,
>
>Perhaps I have been using my lomo tank outside of its intended
>purpose all of this time...but I have always poured my chemistry
>directly into the centre opening at the top of the tank (where the
>agitation assembly is), similar to the pouring opening at the top of
>a 35mm Ansco processing tank. I use the hose for draining only. I
>wrap the hose along the side of tank with the end pointing upwards
>and secured with tape the rest of the time (to prevent leaks during
>processing).
More information about the FrameWorks
mailing list