[Frameworks] ESC bulbs

[Buck Bito - Movette]

Hi Adam,
ESCs are hard to come by these days, so a true ESC you'll probably only
find as NOS on eBay...

There are two readily available alternatives that I know of - the EJL
which is the same spec except for the filament orientation. The CC8
filament on the original ESC is better at hiding the filament shadow, but
I've used the EJL and ELC with acceptable results. The ELC is a HOTTER
bulb and introduces a risk of overheating and a more significant risk of
overloading the transformer and bricking your GS...
* Most new lamps I've gotten have the faceted reflector rather than the
original style smooth reflector, but this hasn't caused problems for me...

There is a link to 1000bulbs.com below, but there are other online lamp
shops that will stock these. I used to rely on purelandsupply.com, but it
seems they no longer stock EJLs...

ESC (Original) ::::::::::::::::::::::
volt: 24
amp: 8.33
watt: 200
base: GX5.3 - Miniature 2-pin round 1.5mm, 5.3mm centered
glass: MR16D
filament: CC8
fil.res.: 2.88 ohm
m.o.l.: 1.75 inch (44.5MM)
cri: 99
color temp: 3400
=====================================
Alternatives:

EJL:::::::::::::::::::::
volt: 24
amp: 8.33
watt: 200
base: GX5.3 - Miniature 2-pin round 1.5mm, 5.3mm centered
glass: MR16D
filament: CC6
fil.res.: 2.88 ohm
m.o.l.: 1.75 inch (44.5MM)
cri: 99
color temp: 3400

ELC::::::::::::::::::::: ***May Fry Your Transformer***
volt: 24
amp: 10.4
watt: 250
base: GX5.3 - Miniature 2-pin round 1.5mm, 5.3mm centered
glass: MR16D
filament: CC6
fil.res.: 2.31 ohm
m.o.l.: 1.75 inch (44.5MM)
cri: 99
color temp: 3400

http://1000bulbs.com/search/?q=ejl

---Buck Bito

Lawrence "Buck" Bito
Movette Film Transfer
*NEW LOCATION*
1407 Valencia St.
San Francisco, CA 94110
(Valencia at 25th St.)
415-558-8815
Open Tuesday - Saturday
Tue+Thu: 8-6, Wed+Fri: 9-6, Sat: 10-4
www.movettefilm.com


On Thu, May 9, 2013 10:02 am, Adam Hyman wrote:
> Sorry, I meant GS-1200.
>
>
> On 5/9/13 9:57 AM, "Adam Hyman" <adam at lafilmforum.org> wrote:
>
>> Hi,
>>
>> Anyone have recommended sources for ESC bulbs for an Elmo GL-1200
>> super8mm
>> projector, ideally in Los Angeles, but I¹ll go for the USA if possible?
>>
>> Best,
>>
>> Adam
>>
>
>
> _______________________________________________
> FrameWorks mailing list
> FrameWorks at jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>