[Frameworks] Fuse holder for ST928 Steenbeck

[Roger Wilson]

Thanks folks!
I'm hoping to just get lucky and find the holders from an old table somewhere, everything works fine on the table its just a couple of the fuse holders got broken during a move. I will try Steenbeck but I've contacted them in the past and I find they are not very helpful with older parts. 
Thanks again!
Roger

Roger D. WilsonFilm Scientist613 324 - 7504rogerdwilson at sympatico.cahttp://www.rogerdwilson.ca
Without failure you can never achieve success. I have based my process and my career as an experimental film artist on this statement; and I welcome it as it pushes me forward as an artist to try something different, something new. 

> Date: Wed, 23 Apr 2014 09:19:41 -0400
> From: kludge at panix.com
> To: frameworks at jonasmekasfilms.com
> Subject: Re: [Frameworks] Fuse holder for ST928 Steenbeck
> 
> The original fuse holder is made by Schurter, and what you show here is just
> the carriage.  The contacts on the part that is in the machine are bad,
> which is why the contacts on the carriage are failing.
> 
> You have to replace the entire fuse holder assembly, not just the carriage.
> My inclination is just to put a piece of sheet metal over the hole and
> install a modern panel mount fuse holder that takes a 5/8 round hole.
> It should be less than an hour for a competent technician.  This would be
> much easier than trying to locate a US source for one that is the same
> physical shape.
> 
> It is POSSIBLE that this is the same form factor as the model 348070/
> 348007 pair from Electronic Plus, as seen here:
> http://www.electronicplus.com/content/ProductPage.asp?maincat=fus&subcat=fho
> 
> And that might work if your goal is to avoid doing any sheet metal work.
> --scott
> 
> _______________________________________________
> FrameWorks mailing list
> FrameWorks at jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman-mail5.webfaction.com/pipermail/frameworks/attachments/20140423/fd276bcb/attachment.html>